Bargain Bloodhound Toys : RSS Products Feed :: ACME

ACME Cyclone Volkswagen 1:10 Nitro Gas Car 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME Cyclone Volkswagen 1:10 Nitro Gas Car 4WD RTR

Cyclone Volkswagen

The Cyclone Volkswagen is one of Acme is latest masterpieces; packed to the brim with performance features, the Volkswagen not only looks good, it has the undercarriage components to match. Aside from the technical achievements and the graphite and aluminum parts, there are a lot of additional performance parts such as a racing bred 0.15 CXP engine, a tuned two-speed transmission and high performance oil filled shocks and long suspension arms. The result is an incredible racing machine. Powered by the massive engine, this Volkswagen and its standard 2-speed transmission is capable of speed up to 55mph (90kmh). This car comes standard with a proportional radio system, an electronic speed controller and a rechargeable battery pack with compatible wall charger. Simply insert 8 AA batteries and use a compatible starter kit to get this car going.

Features: \nAdjustable two-speed transmission maximizes the speed and rpm output out from 0.15 CXP racing engine. Long suspension arms provide superior jumping and handling capabilities. With large, adjustable oil filled aluminum shocks for maximum performance.. Fully loaded with racing ball bearings throughout instead of the standard metal bearings found in most models.. Tuned muffler pipe for high power but low noise.

Specs: \nType:On-Road Car. Channel:2. Kit/RTR:Ready to Run. Width:7.83 in (199mm). Height:4.52 in (115mm). Length:14.96 in (380mm). Wheelbase:10.19 in (259 mm). Distance between Axles:7.28 in (185mm). Wheel Diameter:2.5 x 1 in (64 x 26 mm). Ground Clearance:0.33in (8.5mm). Engine:CXP .15. Gear Ratio:Low 7.83:1, High 5.69:1. Speed:55+MPH (90kmh).

Comes with: \n1/10 Scale On-Road Race Car. 2CH CE approved Remote control radio transmitter (batteries not included). Adjustable aluminum oil filled shocks. Tuned muffler pipe for high power but low noise. Quick access sealed radio and battery box. 2 speed automatic gearbox. Anti-roll bars fitted as standard. Instructions manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Cyclone Subaru WRX 1:10 Nitro Gas Car 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME Cyclone Subaru WRX 1:10 Nitro Gas Car 4WD RTR

Cyclone Subaru WRX

One of the most popular vehicles to ever compete in the WRC Championships, the Subaru Impreza WRC continues to push technological limits in the quest of competition. Team lead driver Petter Solberg has harnessed Subaru is innovative all-wheel drive system with a powerful boxer engine design to take on the intense conditions and demand of global competition. Now, Subaru enthusiasts and WRC fans can drive a Subaru Impreza WRC. Built on ACME is proven 1/10 anodized aluminum alloy chassis, this Subaru features a powerful 0.15 CXP engine and two-speed gearbox transferring power into a rally inspired shaft driven 4WD transmission. Connecting this Subaru to the road are four rally ready wheels, connected to four aluminum shocks and racing bearing to provide an exceptional smooth ride. This care comes standard with a proportional radio system, an electronic speed controller and a rechargeable battery pack with compatible wall charger. Simply insert 8 AA batteries and use a compatible starter kit to get this car going.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Cyclone Mercedes Benz CLK 1:10 Nitro Gas Car 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME Cyclone Mercedes Benz CLK 1:10 Nitro Gas Car 4WD RTR

Cyclone Mercedes Benz CLK

This sleek red Ferrari is modeled after the real world, 12 Cylinder Ferrari, named after the companys founder, Enzo Ferrari. First built in 2003 using Formula One technology, the Enzo was named one of the greatest Ferraris ever built and one of the top sports cars of the century. The Italian stallion comes home in this exciting 1/10 scale vehicle. The Ferrari is loaded with race-tested reliable components such as a powerful 0.15 CXP delivering proven reliability and power mated with a racing tuned two-speed transmission. The result is powerful output over a wide power range. Take into account the wide tuning spectrum and this beauty is forgiving. The 0.15CXP is combined with a large capacity 75cc fuel tank, providing endurance driving. Powered by the massive engine, this Ferrari and its standard 2-speed transmission is capable of speed up to 55mph (90kmh). This model comes fully built with a piston style radio control simply add a compatible starter kit.

Specs: \nType:On-Road Car. Channel:2. Kit/RTR:Ready to Run. Width:7.83 in (199mm). Height:4.52 in (115mm). Length:14.96 in (380mm). Wheelbase:10.19 in (259 mm). Distance between Axles:7.28 in (185mm). Wheel diameter:2.5 x 1 in (64 x 26 mm). Ground clearance:0.33in (8.5mm). Engine:CXP .15. Gear Ratio:Low 7.83:1, High 5.69:1. Speed:55+MPH (90kmh).

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

Conquistador Monster

Made in the spirit of tough, Acme, created a ready-to-run (RTR) off-road machine with a powerful engine and the necessary components that enable this Conquistador to take on even the most rugged terrain. With its tough aluminum oil filled shocks, big engine (0.18 CXP Toki Engine) and tough aluminum chassis ( Aircraft Aluminum), this model is specially designed to tackle any road challenge. But dont let its size fool you-just because something is big, doesnt mean it cant be agile. Utilizing a specially-engineered, on-road suspension and low profile racing tires, the Conq grips the pavement around fast corners at full throttle. The model comes fully built with radio system included. Just add some nitro and an available starter kit and prepare for serious off-road fun.

Features: \nPowerful 18CXP engine provides 35% more torque than previous 0.15 sized model. High performance oil filed shock and long suspension arms provide a stable ride, even over the roughest ground. Rugged Construction: HQ Aluminum Chassis, Sealed components to protect against elements. Racing Ball Bearings.

Specs: \nType:Off-Road Truck. Channel:2. Kit/RTR:Ready to Run. Width:11.81 in (300mm). Height:6.50 in (165mm). Length:15.35 in (390mm). Wheelbase:11.02 in (280 mm). Wheel Diameter:4.25 x 2.20 in (108 x 56 mm). Ground Clearance (Front/Rear):1.50/1.81 in (38/46mm). Engine:Toki .18 (Upgraded from 0.15). Gear Ratio:10.44:1. Fuel Tank:75CC. Speed:55+MPH (90kmh).

Comes with: \nNEW 1/10 4WD Conquistador Monster Truck. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

Conquistador Monster

Comes with: \nNEW 1/10 4WD Conquistador Monster Truck. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

Conquistador Monster

Comes with: \nNEW 1/10 4WD Conquistador Monster Truck. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Condor Pro 1:10 Nitro Gas Buggy 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

Condor Pro

Right out of the box, the Condor is track ready with is rugged design and racing bred components. On or off the track - the Condor is a vulture. The condor comes fully loaded with a rigid T-6 aluminum chassis, racing ball bearings, large diameter metal disc brakes, high torque servos and premium oil filled aluminum shocks to take on jumps and tough terrain. This hot buggy uses an integrated roll cage which allows convenient access to engine easy start, on the fly carburetor adjustments and quick refueling. With a high horsepower-to-weight ratio, you can expect responsive handling and quick acceleration. Finally, you can conquer your neighborhood with the incredible speed, style and power of the 1/10 Condor buggy.

Features: \n1/10 Scale nitro powered car. 4WD Shaft drive system. Fully ball raced system. GO high quality 18 size pull start engine. Aluminium oil-filled shocks. Front and rear bevel differentials. 75CC Fuel tank. Metal disc brake system. Pre-painted and cut body shell. Sealed box for protecting receiver system. Anti-roll bars pre-fitted. Upgraded 0.18 Toki Engine. upgraded aluminum shocks. upgraded metal ball bearings.

Specs: \nWidth:267MM. Height:155MM. Track:240MM. Length:430MM. Wheelbase:280MM. Gear ratio:5.69:1 (High), 7.83:1 (Low). Engine:New Powerful Go 18. Wheel diameter:88*34MM(FRONT); 88*41MM(REAR). Ground clearance:27MM.

Comes with: \nNEW 1/10 4WD ACME Offroad Buggy. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Condor Pro 1:10 Nitro Gas Buggy 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

Condor Pro

Right out of the box, the Condor is track ready with is rugged design and racing bred components. On or off the track the Condor is a vulture. The condor comes fully loaded with a rigid T-6 aluminum chassis, racing ball bearings, large diameter metal disc brakes, high torque servos and premium oil filled aluminum shocks to take on jumps and tough terrain. This hot buggy uses an integrated roll cage which allows convenient access to engine easy start, on the fly carburetor adjustments and quick refueling. With a high horsepower-to-weight ratio, you can expect responsive handling and quick acceleration. Finally, you can conquer your neighborhood with the incredible speed, style and power of the 1/10 Condor buggy

Comes with: \nNEW 1/10 4WD ACME Offroad Buggy. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Condor Pro 1:10 Nitro Gas Buggy 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

Condor Pro

Comes with: \nNEW 1/10 4WD ACME Offroad Buggy. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME Condor Pro 1:10 Nitro Gas Buggy 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

Condor Pro

Comes with: \nNEW 1/10 4WD ACME Offroad Buggy. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME NB16 Mini Buggy 1:16 Nitro Gas Buggy 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME NB16 Mini Buggy 1:16 Nitro Gas Buggy 4WD RTR

NB16 Mini Buggy

Features: \n1/10 Scale nitro powered car. 4WD Shaft drive system. Fully ball raced system. GO high quality .18 size pull start engine. Aluminium oil-filled shocks. Front and rear bevel differentials. 75CC Fuel tank. Metal disc brake system. Pre-painted and cut body shell. Sealed box for protecting receiver system. Anti-roll bars pre-fitted. Upgraded 0.18 Toki Engine. upgraded aluminum shocks. upgraded metal ball bearings.

Comes with: \n1/10 4WD ACME Offroad Buggy. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nAA Batteries for the transmitter. Nitro Gas Starter Kit. Nitro Gas Fuel.

Buy Now

ACME NB16 Stadium Truck 1:16 Nitro Gas Truggy 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME NB16 Stadium Truck 1:16 Nitro Gas Truggy 4WD RTR

NB16 Stadium Truck

After driving the 1/16 Mini Stadium Truck, you will understand that bigger is not necessarily better. Unlike anything you have ever driven, this truck is small enough for back yard racing, yet powerful enough to outrun its larger sized models due to the many features that have been squeezed inside this little truck. This model features a 0.06 CXP engine that features a powerful two-speed carburetor which delivers power over a wide range and is combined with a massive 38cc fuel tank providing for endurance races. To help it conquer the same terrain as it larger scale models, this stadium truck features racing tuned oil filled aluminum shock and long suspension arms providing superior jumping and handling capabilities.

Features: \nHigh Torque Mini Servos Allow for Effective Weight Management. Rugged Aluminum Shocks Provide the Stability to Conquer Tough Terrain. Powerful .06 CXP Engine and Large Capacity Fuel Tank Provide for Long Enjoyment. Racing Inspired Disc Brake System and 2-Piece Racing Clutch Provides Racing Performance.

Specs: \nType:Off-Road Truck. Channel:2. Kit/RTR:Ready to Run. Width:8.18 in (208mm). Height:4.25 in (108mm). Length:11.69 in (297mm). Wheelbase:7.51 in (191 mm). Wheel Diameter:3.11 x 1.53 in (79 x39 mm). Ground Clearance (Front/Rear):0.74/0.74 in (19/19mm). Engine:Toki .06 (Upgraded from 0.15). Gear Ratio:11.2:1. Fuel Tank:38CC. Speed:55+MPH (90kmh).

Comes with: \n1/16 4WD ACME Offroad Buggy. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter).

Buy Now

ACME NB16 Mini Buggy 1:16 Nitro Gas Buggy 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME NB16 Mini Buggy 1:16 Nitro Gas Buggy 4WD RTR

NB16 Mini Buggy

The mini rattler brings the bite of a full-sized nitro powered truck down to a manageable 1/16 scale; bringing a new level of off-road excitement to the mini level. Designed and modeled after Himotos incredible line of monster trucks, this is one of the toughest trucks in its class. Featuring an 5 cxp engine and 38cc fuel tank, dual aluminum deck chassis, rugged coil over aluminum shocks, this 4WD powerhouse is packed with the same performance features found in its larger sized counterparts. Ready to run out of the box, the Rattler takes RC to a new height.

Features: \nOversized 5 CXP engine & 38cc fuel tank for long run times. Solid aluminum chassis. Solid aluminum upper deck & Solid aluminum shock tower. High flow air filter keeps engine free from debris. Equipped with front/rear sway bars for improved handling . Disc brake system and brake pads provide tight.

Specs: \nLength:232MM. Width:187MM. Height:108MM. Track:126MM. Wheelbase:177MM. Gear ratio:11:1. Engine:New Powerful Japan Toki 05 nitro engine. Wheel diameter:70mm. Ground clearance:18MM.

Comes with: \n1/16 NB16 Mini Buggy. 5 CXP Nitro Gas Engine. Sport Radio Control System with high speed servos. Instruction Manual.

Still needed: \nNitro Fuel. Starter Kit. 16 AA Batteries.

Buy Now

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Wed, 11 Nov 2009 08:02:47 -0800

ACME Conquistador Monster 1:10 Nitro Gas Truck 4WD RTR

Conquistador Monster

Made in the spirit of beauty, Smartech created a ready-to-run machine stuffed with a powerful engine and tough components that enable it to take on even the most pressing of road conditions. Built on ACMEs proven 1/10 anodized aluminum alloy chassis, this coupe features a powerful 0.15 CXP engine and two-speed gearbox transferring power into a rally inspired shaft driven 4WD transmission. The result is powerful output over a wide power range. Take in to account the wide tuning spectrum and this beauty is forgiving. Powered by the massive engine, this BMW and its standard 2-speed transmission is capable of speed up to 55mph (90kmh). This car comes standard with a proportional radio system, an electronic speed controller and a rechargeable battery pack with compatible wall charger. Simply insert batteries and use a compatible starter kit to get this car going.

Comes with: \n1/10 4WD Conquistador Monster Truck. Trigger-Style Remote Control. Instructions Manual.

Still needed: \nNitro Fuel. Starter Kit. 16 AA Batteries.

Buy Now

ACME Cyclone Ferrari Enzo 1:10 Nitro Gas Car 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Tue, 27 Oct 2009 09:12:56 -0700

ACME Monster T 1:10 Nitro Gas Truck 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Sat, 08 Aug 2009 08:32:00 -0700

Monster T\n\nACME RACING's brand new MONSTER-T has just arrived! The new hot looking shell and 18 TOKI ENGINE offers both professional design and performance in once package! The new aluminum shocks, and metal bearings provide internal durability. THIS ITEM COMES WITH FREE STARTER KIT! It is completely ready to race out of the box! All you need is nitro gas fuel, and AA batteries for the remote control. It is FULLY ASSEMBLED!\n\nFeatures: \nFully Assembled, Ready to Race out of Box!. Assembled aluminum chasis. UPGRADED 18 TOKI ENGINE. UPGRADED ADJUSTABLE ALUMINUM SHOCKS. UPGRADED METAL BEARING. UPGRADED ALUMINUM CLUTCH SHOES. Four wheel drive system with shaft drive. Bevel Gear Differentials. Single Speed. Disc Brake System. 75cc Fuel Tank. Sealed box for protecting receiver system\n\nSpecs: \nLength:420mm. Width:330mm. Wheelbase:280 mm. Wheel Diameter:120mm * 58mm. Ground Clearance (F/R):44/52mm. Track:272mm. Gear Ratio:10.44:1. Engine:18 Toki\n\nComes with: \nACME 1/10 SCALE NITRO GAS MONSTER-T TRUCK. Remote control radio transmitter. Instructions manual\n\nStill needed: \nNitro Fuel. Starter Kit. 8AA (for the transmitter). \n\n

Buy Now

ACME Monster T 1:10 Nitro Gas Truck 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Sat, 08 Aug 2009 08:32:00 -0700

ACME Monster T 1:10 Nitro Gas Truck 4WD RTR

orders@bargainbloodhound.com (Bargain Bloodhound) — Sat, 08 Aug 2009 08:32:00 -0700